Tyri 1414 HID
Integrated Ballast

The 1414 HID (High Intensity Discharge) lights provide significantly more light (lumens per watt-Luminous Flux).  The 1010 HID provides light of daylight quality with a luminous flux of 3,250 lumens (equal to 4 standard 55W halogen lights).  HID bulbs have approximately 10 times the burn life of halogen bulbs.  When replacing halogen lights with HID lights, most applications will require fewer HID lights.  This decreases the total power consumption (amp/Current draw) dedicated to lighting.  Computer designed optics deliver a wide and soft light, which minimizes shadows and reflections.  1414 HID is designed to operate in high vibration off-road applications - ex. agricultural, construction, mining, forestry equipment, general purpose lighting, etc.
Features:

Bulb options

  • 70W Metal halide discharge tube, 24V
  • 35W D1, 12V or 24V

Ballast

  • Fully integrated into housing

Lens

  • Asymmetric, high beam, low beam
  • Custom lens can be developed

Housing

  • Die-cast aluminum, powder coated, dust and water resistant, vibration dampened


Mounting Options

  • Standing, hanging, side mount
  • Mounting orientation: Maximum + 45° (70W) or maximum + 15° (35W) off horizontal to attain good bulb life
  • Corrosion resistant coating

 

Light Patterns
Asymmetrical Symmetrical

DMK lights are available with dampened or undampened brackets in three different heights; 25mm, 30mm or 40mm. Dampened brackets are recommended for off-road uses or in environments where the light may be subjected to excessive vibration. Brackets are also available in three mounting bolt sizes; M8, M10 or M12. Please call our knowledgeable support staff at 715-344-8600 to discuss your specific needs.

 

For more information contact one of our Alliance Partners.
 Information contained herein can change at anytime